5 ways to fix a fan that won't spin without calling a repairman, and tips for its care.

It is very easy to understand how to fix a fan that is not rotating.

You don't need to call in a skilled worker to make repairs to this device.

In addition to saving time, improving the fan so that it doesn't spin on itself can also save expenses.

Therefore, it is very important for us to know this information.

Do you have a similar problem?

Come on, let's take a look at a complete review of 5 ways to fix a fan that won't spin and the following maintenance tips.

5 ways to fix a fan that won't rotate

The first thing you should do is turn off the fan and remove the cover.

The fan itself generally consists of several frames, a fan guard, and a cover for the motor or dynamo at the back.

You need to remove both parts to repair the fan.

After removing the fan guard and dynamo, you need to check the dynamo section because this is where the motor and fan actuator work.

Perform this inspection carefully, as some parts, such as the stator and motor shafts, are easily damaged.

Generally, fan damage due to non-rotation occurs because the bearing or bushing is not functioning optimally.

These two components are located on the fan dynamo motor.

Check the alternator motor to see if there is any corrosion. Linings .

You can do this by looking with your eyes or by inserting the motor shaft into the bearing/bushing and then rocking it right and left.

If it is loose, it means The linings are worn out.

Leave The linings were then replaced with new ones.

Then reinstall Liners for the dynamo engine.

After repairing the dynamo engine parts, bearings and bushings, all parts of the dynamo engine must also be cleaned of dust and dirt .

Dust and dirt stuck to the fan motor are likely to damage the fan's function in the short and long term.

So make sure the fan is clean and tidy.

After cleaning the motor, a fan and motor guard should be installed at the back so that the fan looks as new as usual.

It's easy, isn't it, how to fix this non-rotating fan?

Although it is working normally again, there are some fan care tips that are just as important for you to know.

There are 5 fan care tips you need to know so that your fan stays in good condition and is rarely damaged.

1. Clean the fan carefully.

2. Avoid using a rough fan.

3. Do not expose to water.

Because water can damage the motor, especially the fan dynamo.

4. Make sure the cable is in good condition.

5. Avoid continuous use.

Give it a break for a few hours after a long period of use, so that the fan motor does not overheat.

Okay, these are 5 ways to fix a fan that won't spin and tips for caring for it that you can know.

We hope it's helpful and that you can do it at home, yes!