Gasoline-powered water pump - installation and use

The gasoline-powered water pump is distinguished by its ease of transport, versatility, and ability to be used in areas without electricity. Therefore, we recommend it and today we will show you how to install it step by step.

How to install and use it:

 Each pump comes with hose connections + 3 mounting brackets:

 1- A plastic spiral hose is installed in the 2" suction pump opening, and a clamp is placed to ensure the hose does not come loose due to water pressure.

2- A linen-type hose is installed in the 2" inlet of the booster pump, and a clamp is placed to ensure that the hose does not come loose due to water pressure.

3- The pump is filled with oil

4- The pump is filled with gasoline

5- The pump is now ready for operation via the filling rope

6- The rope is pulled outwards several times until the gasoline reaches the engine and it starts to rotate.

 

The following points should be noted before operation:

 1- The pump comes from the factory without oil or gasoline

2- The oil type must be 40 grade

3- The fuel type is unleaded gasoline.

4- The length of the suction hose must be no less than 3 meters and no more than 8 meters.

5- The length of the discharge hose must be 25 meters or less