How to calculate the gypsum ceiling requirements for a house
Calculating the required amount of gypsum ceiling material for a house must be done accurately. Calculating the total material and unit cost requires a specific formula.
The roof part of a house is also known as the ceiling. The ceiling itself is an important element of the building.
Therefore, if you are planning to build a house, you should make an accurate calculation of the roof.
There are several types of ceilings, including gypsum ceilings. The attractive appearance of gypsum makes it a popular choice.
The important role of the ceiling as a barrier between the ceiling and the room, in addition to providing aesthetic value.
Therefore, you should carefully consider how much the costs will be.
Okay, so that you have an idea of how to calculate the correct gypsum ceiling requirements, here is the description.
How to calculate gypsum ceiling needs
The roof is one of the building elements of a house. Installation, from the initial materials to the cost included in the budget, must also be considered.
1. Prepare all materials or substances
To install a roof in a house, you first need to prepare the materials or supplies.
The installation of gypsum ceilings must still utilize the ceiling frame.
The ceiling frame used is usually in the form of hollow iron for gypsum boards.
After that you can start calculating the requirements for the materials needed, not just gypsum.
This time, an example of calculating gypsum ceilings with a room area of 4 x 5 m = 20 m2 will be discussed.
So what is the next calculation?
2. How to calculate the need for a hollow steel frame
To be able to calculate the need for gypsum ceilings, there are several steps to take, including how to calculate the need for a hollow gypsum ceiling.
The frame must also be prepared for mounting the plasterboard ceiling. Below is a calculation for how to install a hollow steel frame with the room dimensions mentioned above.
A hollow iron frame, 60 cm in length, is chosen as the material for the longitudinal dimensions. Then, the cross-section is fixed in three middle rows.
Thus, the calculation becomes as follows.
For wall supports = (4 + 5) × 2 = 18 square meters. Number of frames per 60 cm = (5 / 0.6) = 8 rows. Length = 8 × 4 m = 32 square meters.
amount Express Hollow frame 4 x 4 cm = 3 x 5 m = 15 square meters
Therefore, the total requirement for a hollow steel frame for the roof is 18 + 32 + 15 = 65 m.
With a length of 4 meters for each hollow iron rod, a hollow frame is required: 65/4 = 16.25 = 17 hollow rods.
3. How to calculate gypsum board requirements
For a ceiling measuring 4 x 5 m, there is a list of gypsum required with a total length of (4 + 5) x 2 = 18 square meters.
Therefore, for the size of the gypsum ceiling, a list of 18 square meters is needed.
4. How to calculate the size of a gypsum ceiling
Having taken everything into account, it is now time to get into how to calculate the need for gypsum ceilings.
The calculation method is easy, you just need to look at the standard size of a gypsum ceiling which is 1.2 x 1.4 m.
In this way, you know that the area of one gypsum board is 2.88 square meters.
If the room where the gypsum ceiling will be installed is 20 square meters and has an area of 4 x 5, what is the need for a gypsum ceiling panel?
In order to perfectly cover the roof of the house, the calculation is done as follows.
Plywood requirements = Ceiling size: Area per board + 5% safety factor
Requirements = 20 meters: 2.88 meters = 6.94 boards.
Then calculate the following safety factor.
Wisdom = 5% × 7 sheets = 0.35 sheets.
Then it is calculated:
Total plywood/gypsum requirements = 6.94 sheets + 0.35 pieces = approximately 7.29 sheets up to 8 pieces of boards.
Thus you can prepare a budget for installing a gypsum ceiling with the above material requirements.