Easy ways to cut glass with nails for beginners

Having previously discussed the steps for cutting glass in general, it is now time to learn how to cut glass with nails in a way that is easy for beginners.

This method may seem a bit strange and unreasonable.

Because glass has strong properties, but it is easy to break due to its hard material.

On the other hand, nails are common objects that are attached to solid parts of the house such as walls.

But in reality, you can cut glass with just a nail, you know!

Let's take a look at the steps and how to cut glass with easy screws for beginners.

How to cut glass with nails for beginners

1. Preparing the tools and materials

How to cut glass with nails, the first thing you need to do is prepare the tools and materials.

Some of the tools and materials that need to be prepared are nails, glass, lubricants, pen-type glass cutters, and a glass cutter .

After preparing the equipment and materials mentioned above, you can proceed to the next process.

2. Prepare the cutting mat.

One of the things that should not be forgotten in the process of cutting glass is the cutting mat.

This will make the chopping process easier for you later.

The mat you can use can be a large table or a flat surface board.

Next, carefully place the glass or glass so that it does not break.

You can use other materials such as carpets or similar items as an alternative to a mattress.

3. Use lubricants

Once everything is ready, you need to lubricate the glass with lubricant.

Several types of oil or liquids that you can use include kerosene, diesel, or others.

This is to facilitate the cutting process so that it is more precise as desired.

4. Calculate the required volume of glass

After that, after coating the glass with lubricating oil, you need to measure it as you like.

You can use thread to make sure the cut line is straight.

Then prepare the glass tweezers so that it does not break or become damaged during the splitting process.

5. The process of cutting glass with nails

Finally, after carrying out the steps mentioned above, you can now proceed with the glass cutting process.

Break the glass carefully, and make sure that before cutting the glass it has been coated with lubricating oil, in order to avoid messy glass breakage.

To avoid a skewed and chaotic splitting process, gently shake the pliers until the glass breaks.

In this way, you will get a straight piece of glass that does not deviate from the predetermined line.

6. Trim the cuts if they are less than the maximum.

If the cutting results are not perfect, you can rearrange the results again.

You can also lubricate the part of the glass you want to arrange with oil to make the cutting process easier.

When finished, you can keep the wound in a safe place and proceed with the process of cutting another glass .

good luck!

Okay, these are the steps and how to cut glass with nails that are easy for beginners to apply at home.

If you feel uncertain, you can consult someone who is more knowledgeable and experienced.