How to make a magnetic surface on a wall

One of the most fun and useful ways to add a touch to your bedroom, living room, or office is to create a magnetic surface on the wall to hang your tools or notes in a practical and stylish way.

To carry out this small project in your home, you will need the following tools:

• cleaning sponge
• A piece of wood for moving
• Hand gloves
• 2 paint rollers
• Paper adhesive
• magnetic paint can
• Paint the wall any color you like

Steps of action:

• Clean the area to be painted with a sponge and clean water to remove dust and dirt. This step is very important for achieving excellent results when the project is finished.
• Mark the surface to be painted using paper tape.
• Open the can of magnetic paint and stir the contents well with a piece of wood until it reaches the highest level of viscosity, so that it is ready for use (Note: 1 liter of magnetic paint is enough to cover an area of ​​16 square meters).
• Using a paint roller, paint the surface outlined with the masking paper in an orderly fashion from top to bottom.
• For best results, paint the area with three coats, allowing 30-45 minutes of drying time between each coat.
• The surface will be completely dry within 30 minutes after painting is complete.
• Wait 4 hours to paint the surface the desired color using the same method.

Note: In the final step, it should be applied 4 hours after the magnetic paint has been applied. Also, do not paint more than two surfaces at a time to avoid affecting the magnetic strength of the material.