How to change a water faucet quickly and easily, no need to call a repairman!

Drains are among the most important elements in the home, especially since they will affect various activities.

This is because clean water is used in many activities in the home, from cooking and washing clothes to the MCK process.

Therefore, the need for clean water in the home, whether using PAM water or groundwater sources, is extremely important.

However, not everyone can predict whether there will be any damage to the water supply regulator in the home.

One of the most sensitive parts is the water tap; even a broken tap cannot be repaired.

As a result, you will have to replace the water tap in your home with a new one in order to meet your water needs.

So, what is the method for replacing a water faucet quickly and easily without having to call in a skilled worker?

Check out the steps and how to do it all below!

Required tools

Before you learn how to replace a water faucet, there are some pieces of equipment you will need, including:

1. Tube lock

2. Pipe insulation

3. New tap

4. Welding tape

5. Gloves

How to change a water faucet quickly and easily

You can follow these easy steps:

1. Turn off the water

Before replacing a damaged water tap, it is a good idea to shut off all streams and waterways in the house.

The way you can do it is to rotate the water pipe clockwise to turn off that water pipe.

Do this slowly at this stage so that the water does not flow back out of the tap, or you can also shut off the water lines completely if there are no important activities in the house.

2. Open the water tap

How to replace a second water tap: You can do this by opening the water tap you want to replace at a certain point.

Sometimes, there are water taps that only need to be turned to open, but there are also those that use screws.

You need to remove these screws so that the process of opening the water tap is faster and smoother.

3. Clean the water tap

Next, the next method for replacing a water faucet is to clean the dirt on the side of the faucet.

Generally, when a tap breaks or a water tap does not work, there must be dirt that has accumulated over a long period and is affecting the cleanliness of the water.

To clean the faucet, one way you can do it is by using a putty knife.

When cleaning the water tap, make sure there is no mold or rust on the surface corners.

4. Apply the new paste

Next, regarding how to replace the next water tap, you can install a new paste if the water tap is not used with the holder plate or rubber holder.

It is good to put the paste on the water tap holder and then press it slowly so that it can grip the tool.

5. Install the new seat plate and faucet.

After cleaning and applying the paste perfectly, you can install the new faucet holder plate.

Fortunately, there are now many faucets that are easier to install and maintain.

Simply follow the instructions, and the water tap will work perfectly.

6. Install the cover ring and faucet holder.

If your water tap uses screws, tighten each screw on the mounting plate with nuts and cover rings.

You should also tighten the tap in the middle with the round nut cap.

Don't forget to pay attention to the instructions from the faucet manufacturer.

7. Clean up any remaining work from the water faucet replacement.

Before finishing how to replace a water faucet, you need to clean the rest of the work, especially on the surface of the faucet.

For example, leftover paste and other debris. If you see a loose faucet joint, use paste or sealant to strengthen it.

8. Turn on the water line.

The water tap replacement process was completed in its entirety, and it was fully installed.

Therefore, you can now run the water lines in the house and then run the pipes optimally.

Make sure there are no leaks or water droplets remaining when you turn on the tap. If there are any, turn it off first to prevent dripping.

These are some steps on how to replace a water faucet that you can easily do from home.