How to cover holes in tiles

You're decorating, redecorating, and moving furniture and decorative items in your home, then you discover old marks, holes, and other imperfections that mar the new look. This is a very common problem. Has it happened to you too? If so, don't miss the tips we offer in this article, as we'll explain them below. How to cover holes in tiles In an easy and quick way.

How to cover holes in tiles

Remove the plug to cover the openings

The first step we need to take in order to cover the holes in the tiles is to remove the plug, a task that is much easier to perform than you think and is within anyone's reach.

First and foremost, you will need to remove the plastic plug , which is located inside the tile. To do this, use pliers to perform this task and pull it out carefully until the plug is loosened, and then you can extract the piece more easily.

With the paste covered

The next step in covering the holes in the tiles is to cover the opening left by the plug. For this, you will need to use filling paste You will find them for sale in any store specializing in handicrafts.

Once you have it, simply spread it over the area to be covered using a spoon. Then, Smooth the surface thoroughly Remove the excess product to cover the hole it created as much as possible, thus ensuring that your wall is in excellent condition.

Clean and sand the hole in the tile.

Once the paste is ready, you must let it dry completely before continuing to work with it. Once it is ready, you should Clean the area thoroughly To achieve a perfect result, we advise you to sand it so that there are no lumps or irregularities on the wall.

Keep in mind that putty can create irregular and distorted surfaces, so sandpaper will be necessary. To achieve unification And the result of this space in your home is flawless.

Once you've finished sanding, you just have to do that. Clean again To remove any excess dirt that may be left, consider that the final step is to give the hole a coat of paint, so make sure it is very clean and polished before this step.

Wait until it dries

Wait the time specified by the manufacturer on the package. Allow the paste to dry completely . Then clean off any remaining dirt with a damp cloth, and finally paint the paste with a color that is as close as possible to your tiles.

You can give Several layers of paint But don't overdo it, otherwise the arrangement we've just made could be very noticeable. If your tiles have different patterns or colors, it's best to be patient and, using a small brush, try to mimic the design so that your intervention is barely visible.

With patience, care, and attention to detail, you can get a nearly new home without investing a lot of money.