How to paint surfaces using a spray gun

People find it difficult to paint wooden or metal surfaces, even though the process is very easy and does not require any complication:

1. Whether the surface is wood or metal, it is preferable to sand the surface before painting.
2. If there are dents in the wood or rust spots in the iron, a little putty should be applied to it and left to dry, and then the putty area should be scraped off.
3. After it dries, we wipe it well with water and leave it to dry.
4. Shake the paint can well for one minute before use.
5. Keep your hand 25-30 cm away from the surface, and start spraying at a constant speed and in the same direction. That is, if you decide to move your hand horizontally, you should move it from right to left at the same speed.
6. After completing the horizontal direction, spray it in the vertical direction in the same way as before, at the same speed and in the same direction.
7. After that, leave it to dry and it will be ready for use.

Note: The type of paint is very important, and the quantity in the can affects the quality of the paint and the density of the amount coming out of the sprayer, so be sure to buy good types.