Most common air conditioning malfunctions
With the arrival of summer, high temperatures force us to resort to air conditioning. In fact, Home air conditioner It has become an essential element in coping with increasingly hot summer seasons.
To avoid overheating, it's important to maintain the device properly. So how? It avoids damage and increases its productive lifespan.
Here we will tell you what files are Common air conditioning malfunctions Which affect household appliances, how to detect them, and how to solve air problems.
Why does the air conditioner break down?
Refrigeration equipment malfunctions for various reasons. One of the problems that can cause this is... Air conditioning failure Improper use, for example, turning it on and off several times in a row; if the electrical connection is poor, or the drains are in a bad position or are not clean, the device may malfunction or be damaged.
My air conditioner isn't cooling, what are the most common reasons?
Among the most common failures Home air conditioner , problems found From cooling issues and leaks to lack of cleaning and filter replacements, these are just some of the problems. Common air conditioning malfunctions You can learn how to fix it in a simple way.
dripping or water loss
One of the most common defects in equipment conditioning The home is a place where water is dripping or lost, and it can be of two types:
- front
This occurs when there is a failure in the installation and drainage. For example, when the hoses are too high and do not allow for the natural slope that allows for drainage, the water falls through the front of the device.
- heat exchanger or coil
Water dripping from this item is perfectly normal during operation.
It doesn't cool down
Often, the device fails to cool down, even at the lowest possible temperature. These defects are called Cooling malfunctions This can happen for reasons such as lack of gas or problems with dirty or damaged filters.
It is common to recharge the gas in refrigeration equipment, and it is important to check whether the lack of gas is due to a hole in the hoses of the device or simply due to its use for a long time.
Filters can become dirty or damaged and are one of the most common causes of cooling failure.
Compressor problems
The compressor is a key component in refrigeration equipment and is also one of Air conditioning malfunctions Why do people see a specialist so often? Compressor problems are usually due to the following reasons:
The compressor must heat up in an inverse proportional relationship with that which the evaporator cools down.
If the compressor is not running and is not making any noise, make sure it is receiving power.
It may happen that the condensation pressure system is in poor condition or not well regulated.
electrical connections
Strangely enough, it is very common to see between Common air conditioning malfunctions Problems with electrical wiring installation. It is crucial that this be done by a specialist to avoid serious accidents. Cables must be at least 6 mm thick and must have regulatory insulation.
What are the possible solutions for air conditioning unit malfunctions?
Air conditioning failure This can become a headache, as using these devices is essential during periods of high temperatures. Furthermore, if they are not repaired properly or promptly, it can lead to a major failure that disrupts the entire team.
We will leave you with some possible solutions to the most common problems we mentioned in this article:
In case of dripping or fluid loss from the front, always check the slope of the hose or water removal tray, which should be at an angle that favors drainage according to the law of gravity.
When the appliance does not reach the required coolness, it is necessary to determine if there are any kind of cracks or openings that facilitate gas loss.
- Filtering problems
To resolve filter problems, you'll need to open the compartment containing the filters and remove them. Some kits include reusable filters that can be cleaned and replaced, while others require purchasing replacements; in either case, the filters are usually easy to install.
Compressor problems
When the compressor doesn't heat up, it's because the evaporator isn't cooling. This could be due to a gas leak, in which case it must be repaired before refrigerant can be added.
If the compressor does not operate, it is suggested that the entire electrical connection be checked, from inside the appliance to the wall socket where it is plugged in.
In the absence of pressure, it is recommended to carry out pressure measurement tests and repair or installation according to the results obtained.
Regarding electrical connections, always have the cables checked by a qualified electrician and have the cables reinstalled correctly.