Products to solve any problem
-
Amman hardware Mega 3mm Stone Feather
Industrial quality drill bits for metal, wood and plastic. Titanium-coated for prolonged working life.
0.400 JD
-
dewalt 18mm wood drill bit
Crafted from hardened alloy steel for long life, DEWALT Long Power Ship Auger Bits feature a dual-cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration, and hollow center flute provides aggressive chip extraction. Heat treated and tempered for long life.
5.400 JD
-
ZHWEI Simplified wooden quills 16 mm
¼" Hex Shank. Good quality flat bits. 3-point cutting head for clean, large diameter drilling in wood. Angled cutting edges give faster, cleaner cutting. Use with hand or power tools.
0.650 JD
-
Amman hardware 8-piece steel burr set (metric)
25mm and 50mm bits for wider applications Impact rated bits providing up to 3x longer life 135 degree split-point drill bits prevent slipping or walking as you drill
3.500 JD
-
Mega Hardware L Holso long 32mm
100% high quality and brand new. The gears are made from YG8 tungsten carbide steel and the rigidity varies from The hole saw has a twist drill bit inside, which is undetachable. 64HRC to 65HRC. Sharp gears and anti-cutting with lower consumption make the product a long service life. Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass. Can drill about 20mm depth Please note that if you cut the hard material such as steel, ceramic tile...you need to use the oil or water to low the temperature, if not, maybe the drill bit will be broken due to high temperature, please understand Application: drill machine, do not advocate the use of drill machine. Use the matters needing attention: The knife cut materials must be fixed, not mobile, and opening into a 90 degree angle. When the positioning drill through, please wait for a moment, and then slowly drilling. In the process of operation, such as abnormal or cutting is not ideal, please stop working, to cut down on the job. Upper and lower screws are not too hard, so as not to turn the screw slide, such as the appearance of the store does not bear any responsibility. Processing thickness more than 15MM, please go to the next spring, please do not drill metal material under 1.5MM. Available in the bench drill, magnetic drill, drill, the use of pneumatic drill, drill.
3.750 JD
-
ZHWEI Holso Stainless Steel 20-32 mm
Center Drill: HSS Center Drill, Carbide tipped Center Drill Applicable Electric Drill: Portable electric drills (in the rotary-only mode). Not for Use Impact, Bench Drill Machine, Radial Drill Machine, and Magnetic Drill Machine Applications: Aluminum, Copper, Brass, Mild Steel, I Beam, etc. of up to 4 mm (5/32") thickness in combination with HSS Center Drill RP Plates, Hardened Steel, Stainless Steel, Resin Plates, etc. of up to 4 mm (5/32") thickness in combination with Carbide Tip Center Drill
2.500 JD - 15.000 JD
-
senhang 20mm stone feathers
Specially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip reduces jamming when hitting reinforcing steel. Centering point with 130 point angle ensures easy spot drilling with pinpoint accuracy and provides optimum guidance during drilling. The robust secondary cutting edge for 16mm diameters and larger, supports the primary cutter for faster drilling. Shorter spiral windings for faster transport of drilling dust from the head to the flute ensures less wear and heat build up at the tip. Wear mark on both sides of primary cutter guarantees diameter accuracy for anchor fittings – life time indicator in warranty cases. Patented reinforced flute geometry ensures lower vibrations for smoother drilling. The stronger flute means less breakages and better transfer of hammer energy to the tip. Deep flute shoulders give high volume dust removal for optimum drilling speed, less wear and heat build up. Suitable for drilling general masonry including brick, block, concrete, reinforced concrete and natural stone. PGM marked for guaranteed exact sized drilling holes to ensure anchor specifications are not compromised.
1.000 JD
-
zhewei Holsso Diamond 50mm
The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills.
4.000 JD
-
CETA FORM Holso Setaform 41mm
Code J40-041 Size (mm) 41 Size (inches) 1-5 / 8 Length (mm) 44 Explanation DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
7.250 JD
-
CETA FORM Holso Setaform 73mm
16.000 JD
-
CETA FORM Holso Setaform 35mm
DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
8.000 JD
-
CETA FORM Holso Setaform 16mm
Code J40-016 Size (mm) 16 Size (inches) 5/8 Length (mm) 55 Explanation DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
4.250 JD
-
Amman hardware 10mm drill nut
Product Name: Drill Chuck Thread Mount: 3/8inch-24UNF Capacity: 1.5mm-10mm Drill Chuck Overall Size: 57 x 33mm/2.24 x 1.3inch(L*D) Adapter Material: 40cr Shank Type: Round Shank
3.000 JD
-
CETA FORM Holso Setaform 38mm
5.500 JD
-
Amman hardware 3-16 mm drill nut
9.500 JD
-
Amman hardware Wire stripping
Features: Includes: 1 pc. self-adjusting wire stripper Constructed of nickel and chromium steel Self-adjusting jaws that firmly grab wire and cable from 10-24AWG Micro adjusting swivel knob to strip wire smaller than 26 AWG Adjustable stopper controls the length of wire stripped Crimps 10-22 AWG insulated, 10-22 AWG non-insulated, and 7-8mm ignition terminals Wire cutter included for additional functionality
6.500 JD
-
10.000 JD
-
12.500 JD
-
JAZ Soft copper wire brush on a rocket 10"*250 mm
• Specially designed for low weight & high speed mini-grinders (11000 RPM) • High removal capacity & efficiency at high speed performance • Special design allows access to angles & flexible performance on any surface APPLICATION: For continuous and frequent brushing processes (ship building metallic structures welding maintenance etc.) Specially designed for low weight & high speed mini-grinders (11 RPM) High removal capacity & efficiency at high speed performance
18.000 JD
-
PROSKIT Prosecco brush
Product Description These conductive plastic, straight or curved handle brushes are used for thorough component cleaning. Resistivity: 10⁻³ ~ 10⁹ Ω Model No. Handle Resistivity OAL.(mm) Individual Packing AS-501A Conductive PP 10³ ~ 10⁹ Ω 180 Blister Card
2.900 JD
-
JAZ wire brush
Strong and durable with solidly imbedded brass bristles Wood shoe handle with pre-drilled hole for hanging Will not rust
7.250 JD
-
JAZ stainless steel wire brush
Wood handle wire brush. 4 rows of steel wire bristles. Ideal for removing rust, paint, and descaling.
5.000 JD
-
JAZ steel wire brush
3.000 JD
-
3.750 JD
You have seen 312 out of 1006 products