motion sensors

Lamp holder (socket) with motion sensor Product description: This product combines a lamp holder with an automatic motion sensor light switch. It's a new type of energy-efficient motion sensor switch that provides a hands-free, automated way to turn lights on and off, both indoors and outdoors. It saves on your electricity bill and offers convenience by automatically turning lights on when motion is detected and off after a preset time. It utilizes a light-sensitive integrated circuit (IC) for control. The light switch activates instantly when someone enters its detection range. It can automatically distinguish between day and night. It's widely applicable and easy to install. It can be used to illuminate entrances, hallways, stairwells, corridors, closets, bathrooms, basements, warehouses, garages, and other spaces. The automatic motion sensor light switch achieves automatic on/off functions. In addition to automatic light control, it can also be used to control exhaust fans, doorbells, or other devices. Voltage: 265V Power: 50 watts Induction angle: 110° Induction distance: 2-6 m

Read more less

Orbis Electric Timer Technical information: Color: Light gray Dimensions (Length x Width x Height): 88 x 44 x 66 mm Height: 66 mm Length: 88 mm Width: 44 mm Switching cycle: 24-hour mode Operating voltage: 230V AC

Read more less

Light control motion sensor a description: The product can automatically turn lights on or off according to ambient light. Ambient temperature and humidity are unaffected. It is not only convenient but also practical; it can control the load only during nighttime operation. For example, it can be used for streetlights, garden lights, etc. features: Load current: 10 amps Frequency: 50-60 Hz - As darkness falls to some extent, the light-sensitive element begins to switch off until the following morning, thus completing the cycle of work. - Power supply voltage: 110V - 220V, load current 10A. Dimensions: 13*14*5 cm

Read more less

Rotric Motion Sensor a description: Rotric-LX39 180˚ Infrared Motion Sensor Passive infrared sensor. It is used to control lighting fixtures. Or other electrical equipment. For indoor and outdoor use. It operates with LED lighting. It features mechanical vertical adjustment. Technical details: Settings: Lighting time (TIME) and light intensity sensitivity (LUX) Available colors: Black Power supply: ~230V/50Hz Nominal load: 1200 watts Protection class: IP 44 Detection radius: 180 degrees Lighting time: Minimum: 10 seconds ± 3 seconds, Maximum: 7 minutes ± 2 minutes Working radius: Max. 12 m Light sensor intensity: <3-2000 Lux (average) Operating temperature: -20°C to +40°C

Read more less

Orbis motion sensor Surface-mounted, wall-mounted motion detector. IP55 protection against dust and water jets according to EN 60529. Adjustable parameters: timer and light sensitivity. Includes a detection range selector, allowing detection to be disabled in specific areas within the detection zone. Rotatable detector head for pointing towards the detection zone. a description The motion detector is designed for surface mounting on a wall or ceiling, and can also be mounted in corners or angles. IP 55 protection against dust ingress and water jets according to EN 60529 standard. The parameters are adjustable: timing and light sensitivity. The selected field. Detection is limited to specific areas of the catchment area. The pilot status LED indicator, which is turned on when the computer detects movement. Power supply: 230V AC, 50Hz Tear force: 10,230 volts AC. Timer: From 3 seconds to 30 minutes. Light sensitivity: Adjustable 5-2,000 lux Operating temperature: -20°C to +40°C Protection rating: IP 55 according to specification 60529 Detection angle: 200 degrees Front detection range: 12 m at 20°C Lateral detection range: 8 m at 20°C Maximum loads Incandescent bulbs: 2000 watts Fluorescent: 600 volt-amperes Low halogen voltage: 600 VA Halogens (230V AC): 2000W Low-power lamps: 600 VA LED lights: 60 volts amps

Read more less

Infrared motion sensor - 8 meters Features: | Ultra Slim | Say goodbye to bulky motion detectors. This all-new PIR motion sensor boasts an incredibly slim profile, measuring just 1 inch thick. Keep your roofline clean with this unconventionally slim PIR roof occupancy sensor. | Full detection capability | Features 360-degree detection with a detection range of 8 meters (in diameter, free of obstructing objects). Passive Infrared Technology | Uses infrared signals to detect moving objects. It produces minimal heat and is highly energy efficient. IP22 rating: Indoor use only. | Photovoltaic cell enablement | Built-in photovoltaic cell with adjustable sensitivity to turn on the light only when needed. | Home and Commercial Use | Install this motion sensor in your laundry room, garage, or hallway for automatic lighting day or night. Ideal for homes with elderly residents, ensuring family safety. Communicate with your alarm system to trigger an alert. The slim, flat profile makes this sensor discreet yet provides 24/7 protection for your home. Detection distance: 8 m max Rated load: 800 watts Power supply: 220-240V AC Power consumption: 0.45 watts (0.1 watts constant) Installation height: 1.5 - 3.5 m Detection movement speed: 0.6 - 1.5 m/s Size: 9.5 cm

Read more less

Infrared motion sensor - 16 meters Product description: Motion detectors come in different models. With these innovative motion sensors, the technology of the future is at your fingertips. Thanks to motion sensors, you can monitor and control your lighting systems – both indoors and outdoors (selectable). The innovative construction is complemented by an elegant and precise design. The possibilities are endless. Motion sensors are ideal for stairs, hallways, corridors, basements, toilets, garages, storage rooms, etc. Features: PIR motion detectors react to infrared light emitted by moving objects such as animals or people. The motion sensor can be adjusted to match the ambient brightness via the control unit. Technical information: - Building a 360-degree motion sensor. Sensor type: PIR Operating voltage: 220-240V AC - Power consumption: 0.45 watts (0.1 watts constant) - Range: Maximum 16 meters. - Time and twilight control: Yes (located under the cover). - Switching time: 7 seconds to 8 minutes, infinitely adjustable. - Twilight setting: 5-2000 Lux infinitely adjustable. - Detection angle: 360 degrees. - Rated load 2000 watts (halogen). - Rated load 500 watts (CFL). - Rated load 1000 watts (LED). - Protection class: IP20. - Diameter: 115 mm. - Very flat, only 24 mm high.

Read more less