The pipes and fittings division at Oman Hardware provides everything you need for water and drainage systems, whether for homes, projects, or workshops. All products are carefully selected to ensure strength, pressure resistance, and ease of installation.
Pipes and fittings
-
Mega Hardware Chrome trimmer from 0.5 inch to 3/4 inch
Product Description REDUCER CHROME 1/2"x3/4"
1.100 JD
-
Mega Hardware Chrome 0.5" to 3/8" threaded reducer
Product Description REDUCER CHROME 3/8"x1/2"
1.450 JD
-
Mega Hardware Chrome 0.5 inch to 3/8 inch reducer
Product Description REDUCER CHROME 1/2"x3/8"
0.700 JD
-
Mega Hardware Chrome reducer from 1 inch to 3/4 inch
Product Description CHROME REDUCER FOR FAUCETS 1"x3/4"
1.400 JD
-
BG Tighten the 1-inch connection
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JD
-
BG Tighten the 1/2 inch connection
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JD
-
Amman hardware Tighten hollow connection 1/2-16 mm
Straight male fitting 1/2" 16mm Italy
1.350 JD
-
Amman hardware Italian 3/4" 26mm hollow coupling
Straight male fitting 3/4" 20mm Italy
3.350 JD
-
Amman hardware Tighten 1-inch iron joint
2.200 JD
-
Mega Hardware L Valve with 3/4 inch tension fitting
Product Description BALL VALVE 3/4" WITH HOLLANDER (ITAP)
7.000 JD
-
Amman hardware Tighten 1/4" 1" iron joint
3.250 JD
-
Amman hardware Tighten a 2-inch iron joint
6.500 JD
-
Amman hardware Tighten double 3/4 inch connection
PERFETTO_16*16*2 DOUBLE FITTING_Tighten the double connection
3.300 JD
-
Amman hardware 1/4 inch plastic connector
Product Description 11/4" Saudi Plastic Tensioner
3.000 JD
-
Amman hardware 1-inch plastic tensioner
Product Description CHANAL_Plastic connector "1 Saudi
2.400 JD
-
Amman hardware 2-inch plastic tensioner
Product Description STRAIGHT UNION CHANAL 2"
8.500 JD
-
Amman hardware 1/2 inch plastic connector
Product Description CHANAL_Plastic connector "11/2 Saudi
7.000 JD
-
M-Z 1/2 inch Italian hollow connection
Product Description BRASS CONNECTOR 1/2"x20
2.200 JD
-
Amman hardware 3/4 inch male connector
Product Description COMPRESSION FITTINGS WITH ADAPTOR 3/4"
3.300 JD
-
Amman hardware T-stretch connector 16mm
Product Description TEE CONNECTOR 16MM
6.900 JD
-
Amman hardware Tighten the 1/2 inch connection
Product Description COMPRESSION FITTINGS WITH ADAPTOR 1/2"
1.700 JD
-
Amman hardware Tighten the 1-inch connection
Product Description COMPRESSION FITTINGS WITH ADAPTOR 1"
5.500 JD
-
Amman hardware Tighten the hollow connection, 3/4 inch, Spanish copper
Product Description BRASS CONNECTOR 3/4"x20
3.300 JD
-
Amman hardware Italian male 1/2 inch tightening connector
Product Description COMPRESSION FITTINGS WITH ADAPTOR 1/2" FC17CR004
2.800 JD
You have seen 72 out of 142 products