The pipes and fittings division at Oman Hardware provides everything you need for water and drainage systems, whether for homes, projects, or workshops. All products are carefully selected to ensure strength, pressure resistance, and ease of installation.
Pipes and fittings
-
Mega Hardware Chrome nipple 0.5 inch
Product Description CHROME NIPPLE 1/2 * 30MM
1.600 JD
-
Mega Hardware Italian chrome nipple 0.5 inch
Product Description CHROME NIPPLE 1/2 * 15MM
1.100 JD
-
Mega Hardware Chrome nipple 0.5 inch long 20mm
Product Description CHROME NIPPLE 1/2 * 20MM
1.250 JD
-
Mega Hardware Italian chrome nipple 3/4 inch
Product Description NIPPEL MALE CHROME 3/4"
1.250 JD
-
Mega Hardware Italian chrome nipple 0.25 inch
Product Description NIPPEL MALE CHROME 1/4"
0.750 JD
-
AKSA 3/4-1/2 inch reducer
Product Description Male Tap Reducer 1/2" x 3/4" BSP Bath Shower Pipe Reduction Dog Legs Eccentric
2.250 JD
-
Mega Hardware Saudi 1-1/2 inch weight
Product Description CHANAL 1/2"_"Saudi deduction 1
0.500 JD
-
CHANAL 1-3/4 inch plastic reducer
Product Description CHANAL PLASTIC REDUCER 1"-3/4"
0.500 JD
-
Mega Hardware 3-2 inch plastic reducer
Product Description REDUCER 3"-2"
0.450 JD
-
Mega Hardware Iron thinner 1 - 3/4 inch
Product Description HEX REDUCED SOCKET 1*3/4
1.000 JD
-
Mega Hardware Iron thinner 1/4-1 - 3/4 inch
Product Description HEX REDUCED SOCKET 1.25*3/4"
1.200 JD
-
Mega Hardware Iron thinner 1/4-1 - 1/2 inch
Product Description HEX REDUCED SOCKET 1.25*1/2"
1.000 JD
-
Mega Hardware 1/4 inch plastic reducer
Product Description PVC ADHESIVE FITTING TRANSITION THREADED SOCKET 1"
1.500 JD
-
Mega Hardware Copper reducer from 1 inch to 3/4 inch
Product Description REDUCER BUSH BRASS 1"
2.000 JD
-
Mega Hardware Chrome-plated double-ended serrated reducer from 3/4 inch to 0.5 inch
Product Description REDUCER CHROME 3/4"x1/2"
1.250 JD
-
Mega Hardware Chrome trimmer from 0.5 inches to 0.25 inches
Product Description REDUCER CHROME 1/2"x1/4"
1.100 JD
-
Mega Hardware Chrome trimmer from 0.5 inch to 3/4 inch
Product Description REDUCER CHROME 1/2"x3/4"
1.100 JD
-
Mega Hardware Chrome 0.5" to 3/8" threaded reducer
Product Description REDUCER CHROME 3/8"x1/2"
1.450 JD
-
Mega Hardware Chrome 0.5 inch to 3/8 inch reducer
Product Description REDUCER CHROME 1/2"x3/8"
0.700 JD
-
Mega Hardware Chrome reducer from 1 inch to 3/4 inch
Product Description CHROME REDUCER FOR FAUCETS 1"x3/4"
1.400 JD
-
BG Tighten the 1-inch connection
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JD
-
BG Tighten the 1/2 inch connection
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JD
-
Amman hardware Tighten 1-inch iron joint
2.200 JD
-
Mega Hardware L Valve with 3/4 inch tension fitting
Product Description BALL VALVE 3/4" WITH HOLLANDER (ITAP)
7.000 JD
You have seen 48 out of 117 products