All
JTEOH مفتاح شق رنج 55 ملم
TengTools Combination Spanner 600555 – 55mm Manufactured and designed in accordance with DIN3113A from high grade Chrome Vanadium Steel. Same dimensions at both ends. The 12 point ring end is set at a 15° angle. Hip grip ring ends to drive on the flat rather than the corner to help avoid damage to fastenings and to enable use on previously damaged fastenings. Polished heads. Satin finish.
35.000 JD
OULIMA طقم شق رنج 8-19 ملم
Polished alloy steel CRV Good abrasion performance and rust prevention Size 8,10,12,13,14,17,19mm Reversible ratchet wrench Heat treatment processing
25.000 JD
HUSKY طقم شق رنج مقاسات مختلفة
SIZE 6-8mm 10-11mm 14-15mm 16-17mm
11.000 JD
super ego اداة ثني مواسير النحاس
16MM COPPER TUBE BENDER 5/8 OD Light tool for easy bending. For bending pipes from 0 º to 180 º in all planes without tube distortion. Specially designed for bending soft copper, brass and aluminium tube as well as thin wall steel pipes.
68.000 JD
Amman hardware تصليح بنشر
Complete repair kit with everything you need to fix a puncture yourself. Suitable only for tubeless tires. The kit contains the following parts: - Tool / mounting needle with T-handle - 5 pieces. sealing plugs (length 10 cm) - Adhesive Just follow these 5 simple steps. 1. Remove any objects. 2. Re-grate the hole so that the edges are even and the hole large enough.3. Cover the sealing plug with the supplied glue.4. Then insert the sealing plug with the mounting needle (a few cm should protrude out of the hole) 5. Cut or cut off the sealing plug, leave 2-3 mm. Then seal with a little glue around the hole and allow it to harden for a while before pumping up the tire.
2.500 JD
wengutools بوكس تي 10 ملم
Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles.
1.100 JD
Amman hardware بوكس تي 19 ملم
EXPERT QUALITY, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles.
2.250 JD
Amman hardware بوكس تي 7 ملم
1.100 JD
hong ma بوكس تي 8 ملم
EXPERT QUALITY, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles.
1.000 JD
Mega Hardware L مفتاح بوجية 21 ملم
Our Top Tech Sprak Plug Wrench is a must have for all DIY'ers when servicing your car. Suitable for both 16mm and 21mm Spark Plugs, this will cover almost all vehicles in the UK.
3.000 JD
Amman hardware طقم بوكسات 12 قطعة 1/4 انش
Made of chrome vanadium steel, high strength and good wear resistance, durable to use. Ideal tool for the repair and maintenance of household appliances. Compact size, high torsion force, high work efficiency and simple operation. Anti-slip handle with ergonomic design that make it easy to operate, comfortable to hold. Including different kinds of wrench socket, meet your different needs.
6.000 JD
Mega Hardware L مفتاح شق رنج 24 ملم
Metric combination spanner.Same dimension at both ends.Made from chrome vanadium with a satin finish.
2.550 JD
CETA FORM شف رنج سيتافورم 25 ملم
Feature: Made of hot stamped precision hardened high quality chrome-vanadium-molybdenum steel.Coating: Triple matte chrome finish.Size: 38 mm.Length: 402 mm.
25.000 JD
JDR مفتاح شق رنج 25 ملم
Same dimension at both ends.Made from chrome vanadium with a satin finish.
3.300 JD
CETA FORM مفتاح شق سيتافورم 13 ملم
B01 Series Combination WrenchesDIN 3113, TS ISO 7738 Star mouth with 15 ° angle, 31CrV3 steel, Matt chrome plated surface.
43.000 JD
CETA FORM مفتاح شق رنج سيتافورم 41 ملم
Premium key made of chrome - vanadium steel 31CrV3, produced by hot forging, Comfortable to use, thanks to ergonomic design, rounded edges for more efficient, barrier-free use, High torque values according to DIN 3113, ISO 7738, elegant, matt chrome finish, can be used in any conditions
35.000 JD
DROP FORGEO مفتاح غاز 27 ملم هندي
Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 – 135 mm with hanging hole. * not standardised. Length (L, L1):- 239 mm Width Across Flat:- 27 mm Width of Head (b, b1, n, W3):- 56,0 mm Height of Head (a, a1, b, h, L2, t):- 12,3 mm Packing Unit:- 10 Piece Weight:- 0.199 kg
0.750 JD0.600 JD
TAKEDO مفتاح شق رنج طقطيقة 16 ملم
12 point box end allows for fine indexing, helping to improve speed and access. 12 point box end fits 4, 6 and 12 point fasteners. The wrench self aligns with the fastener. Full polish finish provides corrosion resistance and easy to clean surfaces. The box end is countersunk for easy application to the fastener. Anti-Slip Design (ASD) open end. Box end incorporates the TorquePlus™ system. 72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.
5.250 JD
TAKEDO مفتاح شق رنج طقطيقة 19 ملم
12 point box end allows for fine indexing, helping to improve speed and access. 12 point box end fits 4, 6 and 12 point fasteners. The wrench self aligns with the fastener. Full polish finish provides corrosion resistance and easy to clean surfaces. The box end is countersunk for easy application to the fastener. Anti-Slip Design (ASD) open end. Box end incorporates the TorquePlus™ system. 72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.
6.000 JD
TAKEDA مفتاح شق رنج طقطيقه 20 ملم
12 point box end allows for fine indexing, helping to improve speed and access. 12 point box end fits 4, 6 and 12 point fasteners. The wrench self aligns with the fastener. Full polish finish provides corrosion resistance and easy to clean surfaces. The box end is countersunk for easy application to the fastener. Anti-Slip Design (ASD) open end. Box end incorporates the TorquePlus™ system. 72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.
6.500 JD
TAKEDO مفتاح شق رنج طقطيقة 24 ملم
12 point box end allows for fine indexing, helping to improve speed and access. 12 point box end fits 4, 6 and 12 point fasteners. The wrench self aligns with the fastener. Full polish finish provides corrosion resistance and easy to clean surfaces. The box end is countersunk for easy application to the fastener. Anti-Slip Design (ASD) open end. Box end incorporates the TorquePlus™ system. 72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.
9.000 JD
CETA FORM مفتاح شق رنج سيتافورم 30 ملم
TA FORM CE-B01-30 STAR WRENCH 30 TOOL WRENCHES Category HAND TOOLS CETA FORM CE-B01-30 STAR WRENCH 30 77CSVILCE030 CETA FORM CE-B01-30 STAR WRENCH 30 Other product categories: HAND TOOLS CETA FORM CE-B01-30 STAR WRENCH 30 TOOL-KEYS CETA FORM CE-B01-30 STAR WRENCH 30 WRENCH CE-B01-30 FORM CETA TOOL WRENCHES FORM CE-B01-30 WRENCH CETA HAND TOOL
7.900 JD
CETA FORM مفتاح شق رنج 32*360 ملم
Ceta Form B01-32 Combination Wrench 32X360mm B01 Series Combination WrenchesDIN 3113, TS ISO 7738 Star mouth with 15 ° angle, 31CrV3 steel, Matt chrome plated surface.
9.250 JD
CETA FORM مفتاح شق رنج سيتافورم 27 ملم
Ceta Form B01-27 Combination Wrench 27X210mm B01 Series Combination WrenchesDIN 3113, TS ISO 7738 Star mouth with 15 ° angle, 31CrV3 steel, Matt chrome plated surface.
8.750 JD
