يضم قسم الصحي مجموعة واسعة من المستلزمات والأدوات المستخدمة في تمديدات المياه والصرف الصحي سواء للاستخدام المنزلي أو المهني، مع مراعاة الجودة والمتانة لتتحمل الاستخدام الطويل. ستجد في هذا القسم كل ما تحتاجه للتركيب، الصيانة، والإصلاح.
قسم الصحي
-
4.000 JD - 35.000 JD
-
Mega Hardware L نبل كروم مزوج 3/4 انش
1.000 JD
-
Mega Hardware L نبل كروم 1/2 انش 15 ملم
1.000 JD
-
Mega Hardware L نبل كوبلنج ماء المنيوم 2 انش
304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings
4.500 JD
-
Mega Hardware L نبل مع مربط
1.500 JD
-
Mega Hardware L نقاصة ابيض اوروبي 3/4 -1/2 انش
0.650 JD
-
BG شد وصل 1/2 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JD
-
Jindal مفة كروم 1/2 انش
0.500 JD
-
Mega Hardware L مفة حديد 3/4 انش
304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings
0.450 JD
-
Mega Hardware L مفة حديد ابيض 1/2 انش
304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings
0.300 JD
-
1.750 JD - 80.000 JD
-
0.000 JD - 80.000 JD
-
12.000 JD - 80.000 JD
-
7.000 JD - 31.000 JD
-
2.500 JD - 16.000 JD
-
16.000 JD - 36.000 JD
-
BSP كوع ستريت ايطالي 1/2 انش
Chrome plated brass BSP threaded pipe fittings are being used to join pipes for water and heating systems. Angled 90 deg elbow fitting comes in 3/8, 1/2 or 3/4 Inch BSP thread size, male on one end and female on the other end.- Type: elbow;- Thread size: 3/8, 1/2 BSP Male x Female;- Material: chrome plated brass;- Max. working temperature: +100C;- Max. working pressure: 1,0MPa (10 bar).
1.500 JD
-
Mega Hardware L كوع ستريت نحاس 3/8 انش
2.350 JD
-
26.000 JD - 36.000 JD
-
32.000 JD - 110.000 JD
-
5.000 JD - 74.000 JD
-
محبس كمبرسور توج يد احمر
محبس كمبرسور توج يدوي بيد حمراء محبس عالي الجودة مصمم للتحكم في تدفق الهواء في أنظمة الكمبرسور الصناعية والورش. يتميز بالتصميم اليدوي المريح واليد الحمراء لتسهيل التحكم. مصنوع من النحاس أو الفولاذ المقاوم للتآكل لتحمل الضغط العالي. مناسب للأدوات الهوائية والمعدات الصناعية، ويستخدم في التطبيقات التي تتطلب صمامًا يدويًا قويًا وفعالًا. الكلمات المفتاحية: محبس كمبرسور، صمام هواء، توج يدوي، يد حمراء، صمام ضغط الهواء، محبس نحاسي، محبس صناعي، صمام تدفق الهواء، صمام معدات هوائية، محبس ضغط عالي.
0.500 JD
-
1.150 JD
-
2.000 JD - 38.000 JD