يوفر قسم المواسير وقطع الربط في عمان هاردوير كل ما تحتاجه من أنظمة تمديدات المياه والصرف الصحي، سواء للمنازل أو المشاريع أو الورش. جميع المنتجات مختارة بعناية لضمان القوة، مقاومة الضغط، وسهولة التركيب.
المواسير وقطع الربط
-
Mega Hardware نبل كروم 0.5انش
1.600 JD
-
Mega Hardware نبل كروم ايطالي 0.5انش
1.100 JD
-
Mega Hardware نبل كروم 0.5انش طول 20مم
1.250 JD
-
Mega Hardware نبل كروم ايطالي 3/4انش
1.250 JD
-
Mega Hardware نبل كروم 0.25انش ايطالي
0.750 JD
-
AKSA نقاصة 3/4_1/2 انش
2.250 JD
-
Mega Hardware نقاصة سعودي 1_1/2 انش
0.500 JD
-
CHANAL نقاصة بلاستيك 1-3/4 انش
0.500 JD
-
Mega Hardware نقاصة بلاستيك 3_2 انش
0.450 JD
-
Mega Hardware نقاصة حديد 1 _ 3/4 انش
1.000 JD
-
Mega Hardware نقاصة حديد 1/4-1 _ 3/4 انش
1.200 JD
-
Mega Hardware نقاصة حديد 1/4-1 _ 1/2 انش
1.000 JD
-
Mega Hardware نقاصة بلاستيك 1/4 1 -1 انش
1.500 JD
-
Mega Hardware نقاصة نحاس من 1انش الى 3/4انش
2.000 JD
-
Mega Hardware نقاصة كروم مسنن طرفين من 3/4انش ل0.5انش
1.250 JD
-
Mega Hardware نقاصة كروم من 0.5انش ل0.25انش
1.100 JD
-
Mega Hardware نقاصة كروم من 0.5انش ل3/4انش
1.100 JD
-
Mega Hardware نقاصة كروم 0.5انش ل3/8انش مسنن
1.450 JD
-
Mega Hardware نقاصة كروم 0.5انش ل3/8انش
0.700 JD
-
Mega Hardware نقاصة كروم من 1انش ل3/4انش
1.400 JD
-
BG شد وصل 1 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JD
-
BG شد وصل 1/2 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JD
-
Amman hardware شد وصل حديد 1 إنش
2.200 JD
-
Mega Hardware L محبس مع شد وصل 3/4 انش
7.000 JD