أطقم الهولسو بجميع المقاسات—مناسبة لقص الخشب، المعدن، البلاستيك والجبس بورد—بجودة عالية وشفرات حادة تضمن سرعة ودقة في الحفر. أطقم متكاملة للمقاولين والنجّارين وأعمال الصيانة مع توافق ممتاز مع جميع أنواع الدريل.
اطقم الهولسو
-
senhang هولسو زجاج 10 ملم
1.750 JD
-
Mega Hardware L هولسو طويل 32 ملم
100% High quality and Brand new. The gears is made from YG8 tungsten carbide steel and the rigidity varies from The hole saw has a twist drill bit inside, which is undetachable. 64HRC to 65HRC. Sharp gears and anti-cutting with lower consumption make the product a long service life. Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass. Can drill about 20mm depth Please noted that if you cut the hard material such as steel, ceramic tile...you need to use the oil or water to low the temperature, if not, maybe the drill bit will be broken due to high temperature, please understand Application: drill machine, do not advocate the use of drill machine. Use the matters needing attention: The knife cut materials must be fixed, not mobile, and opening into a 90 degree angle. When the positioning drill through, please wait for a moment, and then slowly drilling. In the process of operation, such as abnormal or cutting is not ideal, please stop working, to cut down on the job. Upper and lower screws do not too hard, so as not to turn the screw slide, such as the emergence of the store does not pay any responsibility. Processing thickness more than 15MM, please go to the next spring, please do not drill metal material under 1.5MM. Available in the bench drill, magnetic drill, drill, the use of pneumatic drill, drill.
3.750 JD
-
ZHWEI هولسو ستانلس 20-32 ملم
Center Drill: HSS Center Drill, Carbide tipped Center Drill Applicable Electric Drill: Portable electric drills (in the rotary-only mode). Not for Impact Use, Bench Drill Machine, Radial Drill Machine, and Magnetic Drill Machine Applications: Aluminum, Copper, Brass, Mild Steel, I Beam, etc. of up to 4 mm (5/32”) thickness in combination with HSS Center Drill RP Plates, Hardened Steel, Stainless Steel, Resin Plates, etc. of up to 4 mm (5/32”) thickness in combination with Carbide Tip Center Drill
2.500 JD - 15.000 JD
-
senhang هولسو دايموند 70 ملم
Product Name: 70mm Diamond tip drill bit, 70 mm Glass hole saw bit, Glass drill bit Hole Diameter: 70mm (2-3/4”); Shank Diameter: 10mm (3/8"); Total Length: 55mm Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite These diamond drill bits made of high-speed steel, Excellent for making clean and accurate hole The hole does not need further work because the cut is clean, Start drill at 45 degree to surface and align to 90 degree as hole forms,
6.750 JD
-
zhewei هولسو دايموند 50 ملم
4.000 JD
-
CETA FORM هولسو سيتافورم 41 ملم
7.250 JD
-
CETA FORM هولسو سيتافورم 73 ملم
16.000 JD
-
CETA FORM هولسو سيتافورم 35 ملم
8.000 JD
-
CETA FORM هولسو سيتافورم 35 ملم
7.000 JD
-
CETA FORM هولسو سيتافورم 16 ملم
4.250 JD
-
CETA FORM هولسو سيتافورم 19 ملم
4.750 JD
-
CETA FORM هولسو سيتافورم 38 ملم
5.500 JD
-
Mega Hand Tools طقم هولسو كربييد التنغستن المثقوب
16.500 JD
-
Mega Hand Tools طقم هولسو ميجا حديد 13 ملم
26.000 JD
-
Makita هولسو ماكيتا 102 ملم
11.350 JD
-
Makita هولسو ماكيتا 105 ملم
Product Description Specialist for clean, round holes in metal and woodRecommended for processing:- cast steel, gray cast iron, structural steel- alloyed and unalloyed aluminum, bronze, copper- PVC, plexiglass- plasterboard and woodApplication information:- For use in stand drills , hand drills and hammer drills (turn off the hammer)- maximum depth of cut for all sizes 38 mm- quality of cut depends on correct speed and proper cooling (follow the instructions for use)- when cutting metals you should use high quality cutting oil (except cast iron )- to prevent overheating of the saw, the resulting sawdust and chips should be removed as often as possible- the punch is ideal for electricians, heating and plumbing, tinsmiths and locksmiths, as well as in engineering, instrument manufacturing, tanks and car bodies- Break-resistant construction with a solid clamping plate
11.550 JD
-
Makita هولسو ماكيتا 46 ملم
Product Description Makita D-35455 Bi-Metal Holesaw have a vary-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Holesaws with standard attachment to fit a wide range of arbores. High quality in terms of precision, durability and versatility. The holesaws are packed in a nice self-service packing with an instruction leaflet that also works as a tooth protector. Diameter: 46 mm. More Information Brand Makita UPC/EAN 088381369107 Included Component 1 x Makita D-35455 Bi-Metal Holesaw, 46 mm Diameter Model Number D-35455 Model Name Holesaws and Screwdriver Accessories
6.400 JD
-
Makita هولسو ماكيتا 127 ملم
14.150 JD
-
Makita هولسو ماكيتا 41 ملم
Product Description Makita D-35433 Bi-Metal Holesaw have a vary-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Holesaws with standard attachment to fit a wide range of arbores. High quality in terms of precision, durability and versatility. The holesaws are packed in a nice self-service packing with an instruction leaflet that also works as a tooth protector. Diameter: 41 mm. More Information Brand Makita UPC/EAN 088381369084 Included Component 1 x Makita D-35433 Bi-Metal Holesaw, 41 mm Diameter Model Number D-35433 Model Name Holesaws and Screwdriver Accessories
5.250 JD