العدد اليدوية

Product Description Drill hole Ø 60 mm Material properties diamond-tipped Material suitability Tiles, Stone Working length 35 mm Product type Diamond dry drill bits  

Read more less

Product Description Suitable for all soft and hard woods, even wet wood Ideal for use in ancillary building trade, for joiners and roofers Can be used in all drills with 13mm chuck For through-holes, pre drilling for rafter nails and for deep dowel holes Precision ground for accurate dimensional stability when drilling Fast drilling rate due to optimised flute geometry High break resistance, fine surface finish Dimensions: 18mm x 160mm x 235mm  Shank, shape: Hex shank Material that can be processed: Wood Materials that can be processed, other: Pine|Beech wood|Wet wood Drill bit, shape: single spiral Cutter, type: Main blade and pre-cutting blade Cutting direction: right

Read more less

Product Description The Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials. Its sintered cutting segments deliver good performance in a variety of materials including concrete, brick, limestone and roofing tile. The diamond disc is suitable for use with angle grinders. SPECIFICATIONS: Part number 2 608 615 031Packaging type Paper / Cardboard / Corrugated board – Packaging, tube, with Euro holePack quantity 1 PcsDetailsDiameter mm 230Bore diameter mm 22.23Cutting width mm 2.6Segment height mm 7

Read more less

Product Description Digital Battery Load Tester 6V 12V 24V Outstanding QualityIdeal for Cars, Vans, RV’s and Farm VehiclesSuitable for 6V 12V and 24V lead acid batteriesCompact and Portable, ideal for garages and fleet usersStrong yet lightweight steel construction with integrated handle and clamp holdersHeavy duty insulated clampsEasy and safe to use, no sparkingLarge LED display gives batter voltage3 led display indicated if battery is Bad, Weak or Good

Read more less

DIGITAL THERMOMETER

Read more less

Product Description The LCT-300/400BK LAN Cable Testers are intelligent continuity testers for LAN cables which save time on the job. Their intuitive operations keep you from wasting time working through complex menus. A remote terminator helps in identifying cables when labeling after installation. Features **Hand-held and easy to operate *Battery low indicator **Can review the captured pin assignment and failure status **Easy to read cable status to verify cable continuity; open, short,and mismatches **Easy to read LCD display, with 2 line by 12 characters with LCD back light **Automatic power shut down feature for extended battery life **Identify and trace the other end's ID (using supplied terminator) **Maximum testing length is up to 1030 meters **Standard pin configurations and (4) user defined cable modes memorized in CPU **Suggestion mode for intelligent cable identification (Cable type each) **Tests for shielded and non-shielded cable types (Extra feature for LCT-400) **Easy to identify RJ-45 and BNC cable types against preset wiring schemes RJ45 ENTER, Mode, ESC DC 9V battery 154 x 65 x 35mm (W x D x H) 300g 0°C ~ 50°C (Operating),-10°C ~ 70°C (Storage) 10~90% non-condensing 35,000 hrs (25°C) Made In Taiwan 1 pcs 9 Volt Batterie required (included) Free mini wire stripper yellow Tests for shielded and non-shedlded cable types, ● Unshielded twisted pair (UTP) 100 ohms category 3, 4, 5 & 6 Foil shiedlded twisted pair (FTP) 100 ohms & 120 ohms, Shielded twisted pair (STP) 150 ohms type 1 & 6 10Base-T, 100Base-TX and 100Base-T4, ● TP-PMEDIA / TIA-568A/B 10Base / HUB (AT&T 258A) Made In Taiwan

Read more less

Product Description The TMD90A is a dual input thermometer that offers a wide temperature range and accepts type K, J, T, R, S, and E thermocouples and is ideal for HVAC/R technicians, electricians, research, industrial process, and quality control. The dual inputs allow easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements. The triple display with backlight shows T1, T2, and T1 – T2 and includes hold, min/max, relative, and timer/date stamp functions. The TMD90A supports dual channel real time data acquisition using the built-in RS-232 interface and optional software and data transfer cable (Model TM-SWA). High accuracy, multiple type input thermometer Displays T1, T2, and T1-T2 simultaneously Accepts six different thermocouple types Outputs real time measurement data with time stamp Measures from -328°F / -200°C to 3200°F / 1760°C Deluxe carrying case and two Type K probes RS232 output with optional cable and software, TM-SW SPECS Range Best Accuracy Type K -328 °F → 2498 °F (-200 °C → 1370 °C) 0.1 % rdg + 1.4 °F (0.1 % rdg + 0.7 °C) Type J -328 °F → 1400 °F (-200 °C → 760 °C) 0.1 % rdg + 1.4 °F (0.1 % rdg + 0.7 °C) Type T -328 °F → 730 °F (-200 °C → 390 °C) 0.1 % rdg + 1.4 °F (0.1 % rdg + 0.7 °C) Type R S 32 °F → 3200 °F (0 °C → 1760 °C) 0.1 % rdg + 1.4 °F (0.3 % rdg + 0.7 °C) Type E -328 °F → 1832 °F (-200 °C → 736 °C) 0.1 % rdg + 1.4 °F (0.3 % rdg + 0.7 °C) Operating conditions: 0 °C to 50 °C (32 °F to 122 °F) at 0 to 85 % R.H. (non-condensing) Ambient coefficient: 0 °C to 18 °C and 28 °F to 50 °C (ambient temperatures) for each °C ambient below 18 °C or above 28 °C, add the following tolerance into the accuracy spec: 0.01 % of reading +0.03 °C (0.01 % of reading +0.06 °F)

Read more less

Product Description 40mmφCT window and ultra compact size.Low cost and multi-function clamp tester.Data hold function and auto power off.Conform to IEC safety requirements. Withstanding Voltage AC 3700V 1 minute max. (Between the core of CT and outer case) Storage Temperature -10℃ to ～ 60℃ < 70%RH ( without condensation ) Accuracy (23℃±5℃ 80%RH or less) Operating Temperature 0℃ to ～ 40℃ < 80%RH ( without condensation ) Power supply SR-44(1.55V)×2 or LR-44×2 Power consumption 5mW Weight Approx. 100g Measuring Range AC Current:30A/300A (2 ranges auto)AC Voltage:3V～500V (4 ranges auto, 50/60Hz)DC Voltage:300mV～500V(5 ranges auto)Resistance:300Ω/3000Ω (2 ranges auto) AC Conversion Average sensing rms reading Safety standard IEC61010-1, IEC61010-2-032Installation CategoryⅡ 600V or CategoryⅢ 300V Jaw opening capability 40mmφ Limitation of circuit voltage Less than AC 500V Size 64(W)×193(H)×24(D)mm   Accessories Soft case:1Instruction manual:1Test lead:1Batteries LR-44(1.55V):2 Display 3.5 digit LCD max. reading of 3200 Over range indication "OL" mark on LCD Data hold indication "DH" mark on LCD Low battery indication "B" mark on LCD Auto power off Approx. 10 minutes later after the power on. E.M.C. standard EN 50081-1 and EN 50082-1 Measuring method Dual slope integration mode   AC Current (ACA) 0～300A:±2%rdg±8dgt AC Voltage(ACV) 0～500V:±2.3%rdg±6dgt DC Voltage (DCV) 0～500V:±1.3%rdg±3dgt Resistance (Ω) 0～3000Ω:±2%rdg±5dgt Sampling time 2 times/sec Battery life SR-44(200 hours), LR-44(100 hours)

Read more less

Product Description User selectable ºF / ºC Dual LCD display shows ambient temperature and relative humidity Min / Max memory for both functions Humidity Range: 2 to 98% Humidity Resolution: 1% Humidity Accuracy: ±5% Temperature Range: 0 to 50ºC / 32 to 122ºF Temperature Resolution: 0.1º Temperature Accuracy: ±1ºC / ±2ºF Dimensions: 5.7 x 1.2 x 0.8” / 145 x 30 x 20mm Batteries, belt clip and pouch included.

Read more less

Product Description VOLTAGE TESTER WITH AC/DC CAPABILITIES: Tests for AC voltage from 24-600VAC and tests for DC voltage from 6-220VDC. CLEAR VOLTAGE LEVEL INDICATION: The IDEAL Vol-Con Elite Voltage Tester features a vibration mode for clear voltage indication. Audible and LED Indication of both the voltage type and the voltage level. LED LOW BATTERY INDICATOR: LED low battery light flashes red if battery voltage is low to ensure your voltage tester is always charged and ready to use. Replace batteries immediately to ensure reliable performance. DURABLE TEST LEADS: Includes replaceable test leads made from durable silicone for a long life of your voltage tester. Power Source Battery Powered Style Digital Voltage & Continuity Color Yellow Item Weight 0.75 Pounds

Read more less

Product Description Trades and tasks: Universal measuring device for DC and AC voltage, DC current resistance, transistor hFE diode and continuity test, light (luminosity), sound, humidity, temperature overload protection.   Maximum measuring range: -20 °C bis +200 °C (Temperature), -20 °C bis +1300 °C (Temperature), 10 A (Current DC), 20 mΩ (Resistance), 20.000 Lux (Light), 95 % RH (Humidity), 100 dB (Sound), 600 V (Voltage AC), 600 V (Voltage DC) Accuracy: ± 0,5 % ± 10 (Light), ± 0,8 % ± 2 (Resistance), ± 0.5 % ± 2 (Voltage DC), ± 1,0 % ± 2 (Current DC), ± 1,2 % ± 10 (Voltage AC), ± 3,0 % ± 1 (Temperature), ± 3,0 % ± 5 (Temperature), ± 3,5 dB (Sound), ± 5,0 % RH (Humidity) Resolving Power: 0,1 % RH (Humidity), 0,1 dB (Sound), 0,1 Lux (Light), 0,1 mV (Voltage DC), 0,1 °C (Temperature), 0,1 µA (Current DC), 0,1 Ω (Resistance), 100 mV (Voltage AC)

Read more less

Product Description UIGAO UA1010B light meter, light meter, illuminance meter, brightness meter, photometric table. UA1010B professional light meter can be widely used in LED brightness detection, shopping malls, plazas, stadiums, workshops and other industrial or commercial professional photometric scene. Measuring range: LUX-200,000 Lux Resolution: 1LUX Accuracy: ± 4% ± 10dgts (<10000Lux) ± 5% ± 10dgts (> 10000Lux) Repeatability: ± 2% Measurement speed: 2 times / sec Data Hold Range switching: manual Maximum and minimum Change Low Voltage Tips Power: 9V 6F22 Battery * 1 Weight: 176g Photodetector size: 94 × 60 × 29mm Instrument Size: 132 × 68 × 26mm Packing: Color box

Read more less

Product Description  - Ideal for measuring of mechanical, chemical, pottery,food, metallurgy, electric power, air condition,high- temperature heat treatment.- Dual laser for accurately aiming with fast (500 ms) response time- -50 to 580°C (-58°F ~1076°F) Temperature range- 0.10 to 1.00 emissivity adjustable for accurately measuring different surface types- Distance spot Ratio 16:1 measures smaller surface areas at greater distances- Resolution: 0.1°C/0.1°F- Ergonomic & rugged      unit selection, Backlight, Auto power off, Low battery indication, Data hold, Max./Min.value, Max-Min subtracted value, Average value, High/Low temperature alarm Temperature Range-50°C~580°C(-58°F ~1076°F) Accuracy±2°C or ±2%°C Distance Spot Ratio16:1 Emissivity0.1~1.0 Laser classClass II , <1mW Response time & Wavelength500ms / 8-14µm Repeatability±1°C or ±1%°C Resolution0.1°C Unit selection°C /°F Data memory9 memories Laser target pointDual Laser / can be selected on / off Storage temperature-20-50°C (-4-122°F) Operating temperature0~50°C, 10~95%RH Power source6F22(9V) (not included) CertificateCE, RoHS, FCC, FDA Dimension175*130*45mm Weight204g(not including battery)  

Read more less

Product Description  3 1/2 digits LCD display up to 1999 digits- DC Voltage: 1000V ±(1.0%+2)- AC Voltage: 750V ±(1.5%+4), Current: 1000A- Maximum jaw opening: 50mm- Power Supply: Battery 9V (not inc.)- Dimensions: 230 x 70 x 37 mm, 240g

Read more less

Product Description Ideal for measuring objects that should not be touched or are difficult to reach -50°C to 380°C temperature range, in 0.1°F/°C increments Non-contact temperature measurement with +/- 2 ° accuracy Compact and ergonomic design Emission level of 0.10 - 1.00 can be set to allow accurate measurements on different surfaces Distance to point size, 12:1 ratio User-friendly design with backlight, auto power off, battery indicator, data hold, maximum value

Read more less

Product Description Display name: DIGITAL METER units per package:5 Barcode:6971468032404 Product Code:56001

Read more less

Product Description Knipex TwinKey® for all standard cabinets and shut-off systems - well thought out equipment, quality processing  10 profiles. 2 crosses. 1 key. All common locking systems Multifunctional key for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems 8-arm version: two 4-way spider keys connected in a space-saving way using magnets Reversible bit: 1,0 x 7 mm slot and PH2 cross slot Key and reversible bit joined by stable stainless steel wire Quality surface coating Weight-optimised zinc die-cast design Technical specifications Capacity square 5 / 6 - 7 / 8 - 9 / 10 - 11 mm Capacity triangular 7 - 8 / 9 - 10 / 11 - 12 mm Capacity double-bit key 3 - 5 mm Capacity half-moon 6 mm Capacity step-like square 6 - 9 mm Length 92 mm Net weight 135 g                                                             

Read more less

Product Description LCD Backlight Data Hold Multifunction multimeter Continuity with beeper Diode test Transistor test Low battery indication Specifications: Resistance: 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) DCA: 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) ACV: 200/500V ±(2.5%+10d) DCV: 200mV/2V/20V/200V ±(1.0%+2d) 500V ±(1.2%+5d)   The meter is a handheld digital multimeter for measuring DC and AC voltage, DC current, Resistance, Diode, Transistor and Continuity Test, and 1.5V battery test. The Eclipse Compact Digital Multimeter is an economy multimeter that gives you accurate measurements at an affordable price. This multimeter performs all the functions of more expensive models.

Read more less

Product  Description ZHWEI_1185_1617000132_1/2"  20UNF DRILL CHUCK KEY_تحويله جوزه درل

Read more less

Product Description MILWAUKEE_49-56-0071_هولسو35 ملم

Read more less

Product Description ZHWEI_16MM DRILL CHUCK KEY_مفتاح جوزه درل

Read more less

Product Description ZHWEI_10MM DRILL CHUCK KEY_مفتاح جوزه درل

Read more less