All

Product Description Scope : Clean the car,motor-cycle, vehicle, leather, PU products, kitchen and furniture etc. Features : 1. With unique recipe. 2. Contains strong decontamination factor. 3. Deep cleaning. 4. Reactive foam bubbles. 5. Adopts bactericidal and deodorant formula. 6. Aerosol can, spray out bubbles instead of liquid, avoid of flow. Directions for use : use only per label directions. Do not use on suede, leather, silk, velvet or clear plastic, for other fabrics, test on a hidden area prior to use. Don’t use it if the color or texture is affected.Always follow fabric cleaning recommendations. 1. Vacuum first to remove loose dirt, blot wet soils with a clean absorbent cloth. 2. Shake well before use. 3. Spray evenly to the dirty place at about 20 cm distance 4. Let the foam stay on the dirty for 30-40 seconds. 5. It's better to use small brush to clean the oil spots and obvious dirty area 6. Finally use the dry cloth to clean it Heavily stained or soiled areas may require additional applications. Caution : 1. For some special material, spray onto a small unnoticed area to test if it absolutely does no harm to the surface 2. Do not close to fire during the use. 3. Store with the temperature below 50°C 4. Do not thrust the bottle or throw it into the fire. 5. Keep away from children. 6. Drinking is forbidden.

Read more less

Product Description Bison Poly Max Express is a universal mounting adhesive and sealant with a fast final build-up. Montagekit polymax is also suitable for sealing cracks in walls and ceilings. The Best Assembly Kit Bison polymax kit is suitable for bonding, mounting and sealing different surfaces. Bonding: glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa, iron, aluminium, zinc, steel, mirrors, stainless steel, etc. Installation: carpentry, slats, baseboards, window sills, thresholds, fascias, panels, plasterboard, moldings, etc. Sealing : window frames, stair treads, window sills, thresholds and plasterboard How to use Bison Polymax glue? Only process at temperatures between +5°C and +40°C The surface must be clean, dust free and dry for maximum adhesion. Gluing and mounting: Apply the glue in strips or dots (every 10-40 cm) and always at the corners and along the edges of the material. Apply the material to the right place within 10 minutes and press firmly or tap lightly with a rubber hammer. If necessary, clamp or fasten heavy materials for 4 hours. Hand-tightened after 2 hours, the joint is now strong enough for transport or a light load. Maximum final strength after approx. 4 hours, depending on substrate (at least 1 porous material) and ambient conditions. Sealing: Apply the sealant evenly to the bottom of the joint and smooth within 10 minutes with a damp putty knife (soapy water without lemon), a sealant spreader or your finger. Smooth vertical joints from bottom to top. Hardening is complete after a few days (depending on the thickness of the layer). When repainting with alkyd paints, the paint may dry more slowly. Use white spirit to remove wet glue residue. Features of Bison Polymax Express Super fast increase in end strength Very high final resistance Permanent elasticity Applicable indoors and outdoors Can be painted (to be tested beforehand) Good filling capacity Resistant to temperatures from -40°C to +100°C UV, water and weather resistant 100% adhesive (non-shrinkable) Adheres to slightly damp substrates Solvent free Excellent adhesion without primer Acid-free, odorless

Read more less

Product Description Derzmatik Practical Ready Joint Filler Beak Tip Cream 360 gr   Grouting ; ready-to-use joint mixture is made in the tube. There is no need to mix with water or any other substance in any way. It is an acrylic, cream-colored, practical and easy-to-apply joint filler that can be easily applied by anyone who does not require mastery. It does not require a dense creamy mixture. It is applied in two stages (sliding and pulling) with the accompanying spatula.

Read more less

Product Description Bison poly max high tack express transparent is a universal, crystal clear mounting adhesive and sealant, with high initial tack and rapid final strength build-up. Glue Including glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa ® , iron, aluminium, zinc, steel, stainless steel and other metals, ceramic tiles, cork and mirrors To assemble This includes skirting boards, laths, slats, window sills, thresholds, fascias, sheet material, insulation material, plasterboard, polystyrene ornaments and decorative frames. sealing This includes skirting boards, (plastic) frames, steps, window sills, thresholds and plasterboard. Also suitable for sealing cracks in walls and ceilings. Not suitable for PE, PP, PTFE and bitumen. When gluing plastic, always carry out an adhesion test first. The adhesion to plastic can vary depending on the type of plastic and the quality of the plastic. Characteristics Crystal clear High initial tack Super fast final strength build-up Very high final strength Permanently elastic Applicable indoors and outdoors Can be painted over (test beforehand) Good filling power Temperature resistant from -40°C to +100°C Water and weather resistant 100% glue (shrink-free) Also adheres to slightly damp surfaces Solvent-free Excellent adhesion without primer Acid-free, odorless

Read more less

Product Description This silicone is used to seal cracks and edges of windows and glass doors and install them from the cornersUsed in the management of agricultural products that contain glassEase of useSmall weight can to get into the exact placesIf you are looking for a source to get the required information

Read more less